Tile, Metal & Colorbond Roofs
Roof Painting Sunshine Coast
Inspected on site first, quoted in writing, then painted as one job
Roof Painting Sunshine Coast is one job with several parts. The roof is inspected, cleaned, repaired where it needs it, primed, coated and sealed, and the gables, gutters and fascias are finished with it so the house reads as one colour from the street. Above All Roof Painting and Repairs paints tile, metal and Colorbond roofs across twenty-four Coast suburbs, from Mooloolaba, Maroochydore and Buderim through Twin Waters, Coolum Beach and Peregian Springs to Kawana Waters, Currimundi and Battery Hill. Every job starts the same way: someone on the roof looking at it before a number is put to it. Book the inspection, ask for the quote in writing, then pick your suburb below.
"Roof painting Sunshine Coast" is one search that covers very different roofs. A metal roof a few hundred metres back from the surf at Marcoola, Mudjimba or Peregian Beach lives in salt air every day of the year, and the corrosion guidance the steel industry publishes is written in exactly those distances. A tiled roof at Buderim, Bli Bli or Sippy Downs, a kilometre or more inland, is having a different conversation, about chalking, moss and ridge pointing. And across the region roughly one occupied home in four is a townhouse, terrace or flat, so the person deciding about the roof is often a committee or an agent rather than the person living under it. Paint is the most visible part of any of those jobs and often the least urgent one. This page sets out what a repaint actually includes, what changes the answer from one part of the Coast to another, and then routes you to the page for your own suburb.


Why Owners Across the Coast Ask Us Before Buying Paint
A roof painter who only sells paint has every reason to recommend it. The approach below is meant to keep Roof Painting Sunshine Coast decisions tied to the roof's real condition rather than to how it looks from the street.
- Inspection before any price: The business publishes that quotes are set after someone has stood on site and looked, and that there is no charge for the visit.
- A written, itemised quote: The published terms are an emailed, itemised quote that is fixed for the agreed scope, with more payable only if you choose to add work. Cleaning, repairs and painting appear as separate lines, so two quotes can be compared operation by operation.
- Repairs come ahead of colour: The five stages the business publishes run inspection, then cleaning with damaged tiles, sheeting, pointing and bolts repaired in the same visit, then surface preparation with a primer bonding stage and colour matching, then roof membrane surface coats, then a clean-up and final inspection.
- One job, edges included: The gables, gutters and fascias are finished as part of the same job, so the trim is not left for another visit.
- Check any contractor, including us: Queensland's building regulator keeps a free public register of licence holders that anyone can search, and says a written contract is required for building work valued at more than $3,300 including labour, materials and GST. Ask for one either way.
- Easy to arrange: Phone 0448 880 363 or email Info.aarproofing@gmail.com to ask for a visit to any Sunshine Coast address.
Tile Roof Painting
Concrete and terracotta tiles fade and chalk at the surface, and the business's own pages say they usually need more preparation and coating than metal sheeting.
On an inland tile roof the inspection settles the ridge and hip pointing first, then cracked or slipped tiles, because both are fixed before the primer bonding stage. Older cement tiles may call for extra sealing, and the quote should say so as its own line.
Book an on-site inspectionMetal and Colorbond Roof Painting
Colorbond and other metal sheeting can chalk and fade while the sheet itself is still sound.
On a beachside roof the inspection starts at the fixings, laps and flashings, because that is where salt sits and where a coastal roof corrodes first. Rust there is treated, or the fixing replaced, before anything is primed; a coating over a rusting screw head is not a repair.
Book an on-site inspectionRoof Repairs
A cracked tile, a run of failed pointing, a lifted sheet or a loose screw is a repair job, not a paint job, and it may be all your roof needs this year.
The business's published repair scope covers securing roof sheeting, replacing and tightening screws, bolts and O-rings, tile replacement and re-pointing. It is done before any paint, not under it, and it is quoted as the repair it is.
Roof repairs on the Sunshine CoastRoof Cleaning
Pressure cleaning strips dirt, moss, lichen and chalking from the surface, and the gutters are cleared of what comes off it.
A clean on its own is often the cheaper first step, and it shows whether the finish underneath still holds. On an older Coast roof what the surface is made of is settled before any cleaning method is chosen, because high-pressure water must never go onto asbestos cement.
Roof cleaning on the Sunshine CoastRoof Restoration
When a roof needs cleaning, repairs, re-bedding and re-pointing of the ridge and hip caps, and a new coating together, the combined job is called a restoration.
If the inspection finds more than a coating can honestly cover, restoration rather than a repaint is the answer, and the quote says so. Painting is a stage inside a restoration, not a substitute for one.
Roof restoration on the Sunshine CoastLeak Detection
Tracing where water is actually entering the roof, rather than treating the stain it leaves on a ceiling.
Onshore weather drives rain sideways, so on the Coast the entry point is often a lap, a flashing or a ridge line well uphill of the stain. The published method runs a visual assessment, a roof-cavity check and controlled water testing, then a written fix plan. Find it first; paint later.
Leak detection on the Sunshine CoastReading a Sunshine Coast Roof Before Anyone Talks About Colour
The first thing that changes across the Coast is distance from breaking surf. Lysaght's material-selection guidance grades roofing suitability in bands of 0 to 100 metres, 100 to 200, 200 to 500, 500 metres to a kilometre, and a kilometre or more, and says that for most projects in Australia relative exposure to seawater and salt spray is the most significant factor in the choice. Its fastener guidance calls for screws to AS 3566 Class 3 or better for most external work not closer than 400 metres from the ocean, Class 4 for severe exposure between 200 and 400 metres from a marine environment, and stainless steel where exposure is very severe. The Galvanizers Association of Australia's corrosivity guide puts the ground within 200 metres of rough seas and surf beaches in category C5 and the next 200 metres to a kilometre in C4. None of that is roof-painting advice, but it explains what an inspector looks for on a coastal metal roof: rust at the fixings, laps and flashings, which a coating rolled over the top would hide rather than fix. On a beachside roof the corrosion question is settled before the colour question.
The second is colour, and it deserves more thought on a roof than anywhere else on the house, because a repaint is the one time the colour of an existing roof gets chosen again. The National Construction Code's housing provisions cap the solar absorptance of a new roof's upper surface at 0.64 in climate zones 1 to 5, and the ceiling insulation a new roof needs under the Code falls as its absorptance falls. That is a rule for new work rather than repaints, but the physics is the same: a lighter surface absorbs less of the sun. What a given colour does to a given ceiling depends on the roof space, the insulation and the ventilation, so no figure is published here for it. Colour matching is part of the surface-preparation stage the business publishes, and the inspection is the point to raise it.
The third is water. The Queensland Government's storm-season checklist opens with the roof: check its condition and repair loose tiles, eaves and screws, and clean gutters and downpipes so water can drain away as quickly as possible. A coating is not a leak repair. Water that gets in past a cracked tile, a lifted lap or a failed flashing tracks along battens and wets insulation before anything shows on a ceiling, and painting over the entry point leaves the roof looking finished while it is still open. That is why the process this business publishes puts inspection and repair ahead of preparation and coating.
The fourth applies to every contractor equally and matters most on the Coast's older streets. Queensland Government guidance treats a home built before 1990 as likely to contain some asbestos material, and says it cannot be identified by looking. It is illegal to use a high-pressure water blaster on an asbestos cement roof. Preparation for a repaint is a wash, so on an older roof the material has to be settled by someone qualified to assess it before any cleaning method is chosen; that assessment is not roofing work, and if the roof is asbestos cement it is work for an asbestos specialist rather than a roof painter.
Nothing on this list is decided from a suburb profile. Whether your roof should be repainted, repaired first, or restored rather than painted is decided on the roof: how much of the surface will still hold a coating, whether the fixings and flashings are sound, how much pointing has failed, and whether a stain inside has a source outside. That is why every job here opens with an inspection rather than a price over the phone.
What does roof painting on the Sunshine Coast include?
The roof and the external surfaces that read with it: the gables, gutters and fascias are finished as part of the same job. The process the business publishes runs in five stages: a full inspection; cleaning, with damaged tiles, sheeting, pointing and bolts repaired as part of the same visit; surface preparation with a primer bonding stage and colour matching; roof membrane surface coats; and a detailed clean-up with a final inspection. What changes from roof to roof is how much of the middle stages a particular roof needs, and that is what the inspection is for.
Do you paint metal and Colorbond roofs as well as tile?
Yes. The business's own pages describe the preparation difference plainly: concrete and terracotta tiles usually need more preparation and coating than Colorbond or metal sheeting, and older cement tiles may call for extra sealing. On a metal roof the inspection concentrates on the fixings, laps and flashings, because that is where a coastal roof corrodes first. On a tiled roof it concentrates on cracked or slipped tiles, chalking and the ridge pointing. Which material you have changes the preparation, not the idea.
How does the quote work, and is the inspection free?
The published terms are an on-site inspection with no charge for the visit and no obligation to proceed, followed by an emailed, itemised quote. Once the roof has been assessed the quote is fixed for the agreed scope, and you only pay more if you choose to add work. Two things are worth knowing alongside that. Queensland's building regulator says a written contract is required for building work valued at more than $3,300 including labour, materials and GST, and recommends a written record below it. And its consumer advice is to get more than one quote and not to decide on price alone, which only works if both quotes list what they cover. Ask for that.
My house is a few streets back from the beach. Does that change the job?
It changes what the inspection is looking for. Industry guidance for steel roofing is written in distance from breaking surf: Lysaght grades material suitability in bands from 0 to 100 metres out to a kilometre or more, and specifies AS 3566 Class 4 screws for severe exposure between 200 and 400 metres from a marine environment, with Class 3 or better beyond that. The Galvanizers Association's corrosivity guide puts the 200 metres nearest surf in category C5 and the next 800 metres in C4. In practice that means a beachside metal roof is inspected at the fixings, laps and flashings before the sheet, and any rust there is treated, or the fixing replaced, before priming. A coating over a rusting screw head is not a repair.
Will a lighter colour keep the house cooler?
A lighter surface absorbs less of the sun, which is why the National Construction Code caps the solar absorptance of a new roof's upper surface at 0.64 in climate zones 1 to 5 and lets the required ceiling insulation fall as absorptance falls. That is a rule for new work rather than repaints, and what a given colour does to a given ceiling depends on the roof space, the insulation and the ventilation, so no figure is published here for it. What a repaint does give you is the one chance to choose the colour of an existing roof again. Colour matching is part of the business's published process, so raise colour at the inspection, and if a cooler ceiling is the goal, say so.
My roof might be asbestos cement. Can it be painted?
Not until the material has been settled, and never after a pressure wash. Queensland Government guidance treats a home built before 1990 as likely to contain some asbestos material and says it cannot be identified by looking, and it is illegal to use a high-pressure water blaster on an asbestos cement roof. So if a roof may be asbestos cement it does not get washed by anyone on this crew, and it is not quoted for painting until someone qualified to assess the material has done so. That assessment is not roofing work, and if the roof is asbestos cement it is work for an asbestos specialist. We will say so on site.
I am a landlord, a property manager or on a body corporate committee. How does it work?
Say so when you book. The written, itemised quote is what a committee or an agent can forward, and the inspection and the job can be scheduled around a tenant, who needs realistic notice of several days of noise and water on the roof; ask for an expected number of days on site so the notice you give is honest. One distinction matters for unit complexes: the multi-unit work the business publishes is roof cleaning, so for a shared roof start with the roof cleaning page and ask at the inspection what else the building needs.
Find Out What Your Sunshine Coast Roof Actually Needs
A repaint is priced on things nobody can judge from the street: the pitch and height of the roof, how equipment gets onto the block, how weathered or previously painted the surface is, how many gables, gutters and fascias are being finished, and what the roof is made of. So start with an inspection rather than a price over the phone, and ask for the scope itemised in writing, which is what lets you compare two quotes on what is being done rather than on the number at the bottom. If you are a landlord, a property manager or on a body corporate committee, say so when you book. Pick your suburb above, call 0448 880 363, email Info.aarproofing@gmail.com, or book the inspection through the contact page.
